PGP & PSP – STANDARD CHEMICAL
Peraflex PGP and PSP composite hoses are designed specifically to convey a wide variety of chemicals such as acids, alkali’s, solvents and petroleum products. Chemical resistance is achieved using seamless tubes and multiple wraps of chemically and aromatic resistant plastic films and fabrics that eliminate potential permeation, effusions and leakage. PGP and PSP offer superior reliability and safety without sacrificing flexibility and durability.
Typical Conveyance
Chemicals such as caustic soda, ethanol and mineral oils
**Refer to chemical compatibility chart for specific recommendations**
SPECIFICATIONS
Peraflex Type PGP & PSP:
Blue With White Stripe
P – Polypropylene Internal Wire
G – Galvanized External Wire
P – Polypropylene Tubes
Blue With Red Stripe
P – Polypropylene Internal Wire
S – (316) Stainless Steel External Wire
P – Polypropylene Tubes
Construction
Cover – Vinyl coated polyester. Abrasion, ozone and fire resistant
Reinforcement – High strength, High-density polyethylene woven fabric
Liquid Barrier – Seamless polypropylene tubes and film barriers
Options – Custom colors, special branding and high-strength ballistic nylon cover
**Other wire combinations available based on service conditions
and chemical compatibility (e.g. PPP, PAP)**
Applications:
- Chemical Carriers
- In-Plant Service
- Rail Tankers
- Ship-to-shore Transfer
Specifications:
- Temperature range: -40°F to +212°F
- Full vacuum rated
- Safety ratio: 5 to 1
- Electrically continuous
- Meets U.S Coast Guard requirements
Standard Bore
I.D (in.)
1
1-1/2
2
2-1/2
3
4
Working PSI
200
200
200
200
200
200
Bend Radius (in.)
2
3
3.5
4
5.5
6.5
Weight (lbs/ft)
0.65
1.0
1.2
2.0
2.4
3.0
Max Length
80
80
80
80
80
80
Large Bore (Heavy-Duty)
I.D (in.)
6
8
Working PSI
200
200
Bend Radius (in.)
22.0
29.05
Weight (lbs/ft)
7.4
14.5
Max Length
50
100
**Larger diameter hose available upon request**
End Fittings
Externally crimped NPT, fixed/floating flanges, quick disconnects and victaulic ends.
All fittings available in a variety of materials
Additional Information
Rated working pressure is @ 70°F
Increased operating temperatures may limit working pressure of the assembly
Technical data is approximate and subject to change.
Never exceed stated working pressures